Torqeedo
Cruise 4.0 Remote Electric Outboard Motor
Torqeedo's new models of the Cruise 4.0 electric outboard motor have been improved to meet the demanding challenges of everyday marine use; making them ready to take on the harshest environmental conditions. The Cruise 4.0 remote is perfect for small boats, dinghies, and sailboats up to 4 tons with a separate steering station.
The improvements make the Cruise even more rugged in the event that it runs aground and even better protected against corrosion when used extensively in salt water.
The Cruise 4.0 is comparable to a 8 HP gasoline outboard and can be easily mounted on your boat with a couple of tools, regardless of whether the remote or tiller version.
A power supply from at least two lithium batteries (Power 26-104) or with lead batteries (lead-gel or AGM) at 48V must be provided for operation.
The Cruise 4.0 Remote is available in short and long shaft versions.
Details
- High-efficiency outboard with 4,000 W input power, equivalent to a 8 HP gasoline outboard.
- All Cruise models are suitable for inflatables and other small boats.
- The Cruise 4.0 is recommended for dinghies and sailboats up to to 4 tons.
- Remote steering connector option, comes with remote throttle.
- Rugged aluminium pylon with reinforced fin – extra robust even when running aground
- Shaft sealant rings mounted in protected area on the inside of the pylons
- Highest-grade seawater-proof aluminium (AlMgSi1), hard-anodized for long service life, even in the harshest conditions
- Lubricant-free polymer plain bearings protect against damage from fishing lines or debris and provide improved mechanical support for propeller shaft – wear-resistant and maintenance-free.
- Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties.
- Aluminium fin coated in polyurethane foam provides additional protection from impacts
- Everything is waterproof to IP67.
- Improved robustness and improved corrosion protection
- 4,000 W input power, in terms of propulsion is comparable with a 8-hp gasoline outboard
- Maximum efficiency outboard
- Integrated on-board computer with GPS-based range calculation
- 25 mm2 cable set (3m) including fuse and main switch
- Emergency magnetic stop key
- Battery cable bridge for lead batteries
- Fuse and main switch
- In the box - Complete motor with pylon, propeller, shaft and transom mount (with guide tube for remote steering), connection cables for cable set, Remote throttle control with integrated display connection cables and fixing material (only Cruise Remote), Tiller (only Cruise Tiller), Link arm and small parts for connecting the remote steering (only Cruise Remote), Magnetic Kill Switch, Cable set with main switch, fuse and bridging cable (1 piece for Cruise 2.0 R/T, 3 pieces for Cruise 4.0 R/T), M8 screw to lock the steering, Operating manual, 5 meter long data cable
Need help choosing the best propeller? Check out Wee Boats' propeller selection guide.
Video
Specs
| Best Use | Dinghies and Small boats up to 4 tons |
|---|---|
| Battery Size | None included, two Power 26-104 is recommended |
|
Running Time (hh:mm) |
Slow 10:45, Full-throttle 01:10 with two Power 26-104 battery |
|
Speed (mph)* |
Slow 3.1, Full-throttle 8.1 with two Power 26-104 battery |
|
Comparable gas outboards (propulsive power) |
8 hp |
|
Comparable gas outboards (thrust) |
9.9 hp |
| Shaft Length | 24.6 inches short-shaft, 29.7 inches long-shaft |
|
Standard propeller (v = speed in km/h at p = power in watts) |
v19/p4000 |
|
Optional propeller (v = speed in km/h at p = power in watts) |
v35/p4000 and v8/p350 |
| Weight | 35.5 lbs short-shaft, 37.5 lbs long-shaft |
| Warranty | 2 year manufacturer's limited warranty for non-commercial use |
| Shipping Weight | 61 lbs short-shaft, 64 lbs long-shaft |
* Depends on type of boat, load, propeller and conditions. Speed and range indications do not represent a legal guarantee.
QUESTIONS & ANSWERS
Ask a Question-
Do you have a photo off the type of bracket used to mount the 4.0 toqeedo
The Torqeedo Cruise 4.0 uses a standard outboard mounting method where the two screw clamps are tightened against the transom. It is visible in the first photo of the product on the webpage https://shopweeboats.com/products/torqeedo-cruise-4-0-remote-electric-outboard-motor.
For more information, the Cruise 4.0 manual is available here https://media.torqeedo.com/downloads/manuals/torqeedo-cruise-RT-manual-DE-EN.pdf.
