Victron Energy

SmartSolar MPPT Solar Charge Controllers 100/30 & 100/50

Regular Price
Sale Price
Regular Price

Sold Out
Unit Price
translation missing: en.general.accessibility.unit_price_separator 

Size 100/30

SKU SCC110030210‍


The SmartSolar MPPT solar charge controllers from Victron Energy in the 100 volt series include the following two models 100/30 and 100/50.  The first number in the model name is the maximum PV open circuit voltage and the second number is the rated battery charge current.

Bluetooth Built-in

Remotely control and monitor the extensive features of your SmartSolar MPPT solar charger with built-in Bluetooth by pairing it with your smartphone or other device via the VictronConnect app.  A VE.Direct port enables a wired data connection to a Color Control GX, other GX products, PC or other devices.

Ultra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points may be present on the power-voltage curve.  Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.  The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98%.  The full output current up to 40°C (104°F).

Flexible charge algorithm

Fully programmable charge algorithm and eight pre-programmed algorithms,
selectable with a rotary switch (see manual for details).  Includes a LiFePO4 (lithium iron phosphate) battery profile.

Extensive electronic protection

Over-temperature protection and power derating when temperature is high.  PV short circuit and PV reverse polarity protection.  PV reverse current protection.

Internal temperature sensor

Compensates absorption and float charge voltage for temperature.

Optional external battery voltage and temperature sensing via Bluetooth

A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.

Fully discharged battery recovery function

The SmartSolar charge controller will initiate charging even if the battery has been discharged to zero volts.  It will also reconnect to a fully discharged Li-ion battery with integrated disconnect function.






    User Manuals

    SmartSolar 100/30 & 100/50 MPPT Solar Charge Controller User Manual

    White Papers

     PWM vs MPPT Solar Charge Controllers

    Data Communication of Victron Products


     SmartSolar 100/30 & 100/50 MPPT Solar Charge Controller Datasheet

    BlueSolar and SmartSolar MPPT Charge Controllers Overview Guide



      Models (Max. PV open circuit voltage/Rated charge current in Amps)




      Rated charge current

      100/30: 30A

      100/50: 50A

      Nominal PV power, 12V

      See note - 1a,b

      100/30: 440W

      100/50: 700W

      Nominal PV power, 24V

      See note - 1a,b

      100/30: 880W

      100/50: 1400W

      Maximum PV short circuit current

      See note - 2

      100/30: 35A

      100/50: 60A

      Maximum PV open circuit voltage

      100/30: 100V

      100/50: 100V

      Peak efficiency 98%

      12V: 30 mA

      24V: 20 mA

      Charge voltage 'absorption' Default setting: 14.4V / 28.8V (adjustable)
      Charge voltage 'float' Default setting: 13.8V / 27.6V (adjustable)
      Charge algorithm multi-stage adaptive
      Temperature compensation -16 mV / °C resp. -32 mV / °C
      Protection PV reverse polarity
      Output short circuit
      Over temperature
      Operating temperature -30 to +60°C (full rated output up to 40°C)
      Humidity 95%, non-condensing
      Data communication port VE.Direct (for details see the data communication white paper)


      Color Blue RAL 5012
      Power Terminals 16 mm² / AWG6
      Protection category IP43 (electronic components), IP22 (connection area)
      Weight (kg)


      Dimensions (H x W x D) mm

      130 x 186 x 70 mm


      Safety EN/IEC 62109-1, UL 1741, CSA C22.2
      Notes 1a - If more PV power is connected, the controller will limit input power.
      1b - The PV voltage must exceed Vbat + 5V for the controller to start.  Thereafter the minimum PV voltage is Vbat + 1V
      2 - A PV array with a higher short circuit current may damage the controller.






      Have a Question?

      Be the first to ask a question about this.

      Ask a Question